RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR PORSCHE BOXSTER 986 1013.031.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

1013.031.1

PORSCHE BOXSTER 986

Model year: 1996-10-2004-11
Special notes: Seat offset approx. 20mm towards the door (Recaro seat moves closer to the door). Rearward sliding distance is reduced approx. 40mm compared to OEM.
Notes / Interference information: For LX (including Ergomed), LS, LT, SR-1, 2, 3, 4, 5, replace the recliner dial on the center console with a thin recliner dial (product number 1600090J), remove the recliner dial on the door and replace it with a rubber cap (product number 1600091J). For the round recliner dial on LX (including Ergomed) and LS, the recliner dial on the center console will interfere, so remove the recliner dial on the door. For New Ortho, New A-8, A-8, Trend, Style, Sport J, JJ, JC, there is some interference between the backrest side and the door armrest. For Trend, Style, Sport D and DC, the backrest side and door armrests interfere slightly, and the recliner dial interferes with the floor. For RS/TS-# series, the offset adapter set for RS/TS-G (product number 1700001J) allows the handle offset to be adjusted in 5mm increments from 5mm to a maximum of 15mm. (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) For RCS, adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation.
Position: One position type
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) For LX, LS, LT, and SR, replace the recliner dial (triangle) on the center console side with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle, remove the recliner dial (triangle) on the door side to avoid (reduce) interference with the vehicle, and install a rubber cap (sold separately) after removing the recliner dial (triangle). Seats with round recliner dials for LX and LS cannot be replaced with a thin dial (sold separately), so they cannot be installed in vehicles. Classic LX Pepita / Classic LX Spektrum For LX, LS, LT, and SR, replace the recliner dial (triangle) on the center console with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle, remove the recliner dial (triangle) on the door side to avoid (reduce) interference with the vehicle, and attach a rubber cap (sold separately) after removing the recliner dial (triangle). The seats with round recliner dials for LX and LS cannot be replaced with the thin dial (sold separately), so they cannot be installed in the vehicle. LX-F (IS-05 base)
LS / LS-# / LT-# For LX, LS, LT, and SR, replace the recliner dial (triangle) on the center console with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle, remove the recliner dial (triangle) on the door side to avoid (reduce) interference with the vehicle, and attach a rubber cap (sold separately). The round recliner dial seats of the LX and LS cannot be replaced with the separately sold thin dial seats, so they cannot be installed in the vehicle. New Orthoped (with Recaro Vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS For the SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro LX, LS, LT, and SR, replace the recliner dial (triangle) on the center console side with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle, remove the recliner dial (triangle) on the door side to avoid (reduce) interference with the vehicle, and install a rubber cap (sold separately) after removing the recliner dial (triangle). The seats with round recliner dials for the LX and LS cannot be replaced with the thin dial sold separately, so they cannot be installed in the vehicle. Rally Special / First generation SR / Early SR-2 LX, LS, LT, SR: Replace the recliner dial (triangle) on the center console with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle, remove the recliner dial (triangle) on the door to avoid (reduce) interference with the vehicle, and attach a rubber cap (sold separately) after removing the recliner dial (triangle). The round recliner dial seats of the LX and LS cannot be replaced with the thin dial sold separately, so they cannot be installed on the vehicle. Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to prepare the side adapter set (product number 1700000J) separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the side adapter set for SP-GN (product number 1600110J) sold separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set [Offset priority] Offset adapter set for RS/TS-G The handle offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F

(Note) This product cannot be installed on any seats other than those listed in the matching information below.

Images are for illustration purpose only. Actual product may vary.