$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 1031.043.2 |
| Compatible Car | FIAT PUNTO 188A1 188A5 |
| Product Description | Model year: 2000-06-2006-05 Special notes: The side airbag built into the factory seat will no longer function. The airbag warning light must be turned off. The seating position is almost the same as the lowest position of the factory seat (when using the ST-JJ center hole). Notes / Interference information: For CS and CSE, use the inner lever. For SR-3, 4, 5, new A-8, A-8, SP-#, and SP-#N, the shoulder part and B-pillar interfere by about 10 to 20 mm. For SP-#, the SP-G offset adapter set (product number 1600094J) is required. For Trend-J, JJ, JC, D, and DC, the backrest side and door armrest interfere by a few mm. For TS-#, RS-#, and SP-X, the shoulder part and B-pillar interfere by about 10 mm. For RMS, adjust to the optimal position using the separately sold RMS side adapter (front/rear height, left/right offset 0/5/10 mm) before installation. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adaptor. Position: 3 height settings available (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE Pro Racer RMS RMS can be installed with the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included |
| Notes | Images are for illustration purpose only. Actual product may vary. |
