RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA CELSIOR UCF30 31 1080.214.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

1080.214.1

TOYOTA CELSIOR UCF30 31

Model year: 2000-08-2003-07
Special notes: The side airbags built into the factory seats will no longer function. Airbag warning light must be turned off. Not confirmed after minor changes.
Cautions/Interference information: For CS, CSE, CT, C-Class, D, DS, and DSE, the recliner cover on the center console must be removed. For RMS, adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, any interference with the interior can be alleviated by making adjustments.
Position: 3 height settings available (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Cannot be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle CSE Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle CT Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle C-Classic Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle D / DH / DV Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle DS / DS-H / DS-V / ES-V/DSE Remove the side cover (recliner cover) to avoid (reduce) interference with the vehicle Pro Racer RMS Please adjust the RMS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, it can be reduced by adjustment. New Orthoped (with Recaro vent)
SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 Side adapter set (product number 1700000J) is required separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 requires the separately sold SP-GN side adapter set (product number 1600110J). PRO RACER(RACER) SP-G/A Side adapter set (product number 1700000J) is required separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbags are standard equipment.

Images are for illustration purpose only. Actual product may vary.