$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 1081.120.2 |
| Compatible Car | NISSAN CEDRIC GLORIA Y34 |
| Product Description | Model year: 1999-06-2001-11 Special notes: The side airbag built into the factory seat will no longer function. Airbag warning light must be turned off. Notes / Interference information: For LS, SR-3, 4, 5, Style-J, JJ, JC, D, and DC, the backrest side interferes with the door armrest by about 5 to 10 mm. The seat cushion side interferes with the center console near the front end of the seat slide position. For New Orso (sold until October 2010), the backrest width adjustment dial interferes greatly with the door armrest at the front of the seat slide position, and the backrest side interferes with the door armrest and center console by about 5 to 10 mm. However, for New Orso sold after November 2010, the width adjustment is electric and there is no width adjustment dial on the door side, so the backrest side interferes with the door armrest by about 5 to 10 mm. For Trend and Sport J, JJ, JC, D, and DC, the backrest side interferes with the door armrest and center console by approximately 5 to 10 mm, and the seat cushion side interferes with the center console near the front end of the seat slide position. For SR-1 and 2, the backrest side interferes with the door armrest and center console by approximately 15 to 20 mm, and the seat cushion side interferes with the center console near the front end of the seat slide position. For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter before installation. Position: 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not available Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter Rally Special / First generation SR / SR-2 early model Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W You will need to purchase the side adapter set (product number 1700000J) separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included, 2WD vehicles (auto driving position seats and auto seat slide function vehicles have not been confirmed) |
| Notes | Images are for illustration purpose only. Actual product may vary. |
