$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 1083.104.2 |
| Compatible Car | MITSUBISHI PAJERO IO H60 70 |
| Product Description | Model year: 1998-06-2007-06 Notes / Interference information: For LX (including Ergomed series), LS, and LT, remove the door-side recliner dial and replace it with a rubber cap (part number 1600091J). For LX (including Ergomed series) and LS with a round recliner dial, remove the door-side recliner dial. For SR-3, 4, and 5, remove the door-side recliner dial and replace it with a rubber cap (part number 1600091J). The shoulder part and B-pillar interfere about 15 to 20 mm, and the backrest side and door armrest interfere about 10 to 15 mm. For SP-#, an SP-G offset adapter set (part number 1600094J) is required. For SP-#N, the shoulder part slightly interferes with the B-pillar. For Style-J, JJ, JC, D, and DC, the door pocket and air lumbar support pump slightly interfere. For Sport-J, JJ, JC, D, and DC, the door pocket and air lumbar support pump interfere slightly, the shoulder part interferes with the B-pillar by about 10 to 15 mm, and the backrest side and door armrest interfere by about 10 to 15 mm. For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. Position: 3 height settings available (For some car models, the legs of the slide rail may need to be cut depending on the installation position, please perform a trial fit before installation.) Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Remove the recliner dial to avoid (reduce) interference with the vehicle, remove the recliner dial and then attach the rubber cap (sold separately). Classic LX Pepita / Classic LX Spektrum Remove the recliner dial to avoid (reduce) interference with the vehicle, remove the recliner dial and then attach the rubber cap (sold separately). LS / LS-# / LT-# Remove the recliner dial to avoid (reduce) interference with the vehicle, and then attach the rubber cap (sold separately). Pro Racer RMS Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J). If there is interference with the interior, it can be reduced by adjusting it. New Orthoped (with Recaro vent) SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro Remove the recliner dial to avoid (reduce) interference with the vehicle, and then attach the rubber cap (sold separately). SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G Offset Adapter Set (Part No. 1600094J). SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN Side Adapter Set (Part No. 1600110J). AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W You will need to purchase the Side Adapter Set (Part No. 1700000J) separately. |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
