$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 1087.102.1 |
| Compatible Car | DAIHATSU STORIA M100S M110S M101S M111S |
| Product Description | Model year: 1998-02-2004-05 Special notes: The seating position is approximately 25mm lower (when using ST-J). The seat offset is approximately 9mm toward the door (the Recaro is closer to the door). For manual transmission vehicles, the seat cushion side interferes with the shift lever, making it difficult to put into gear. For the Storia X4 (Cross Four) 4WD, the seating position is almost the same as the original. Notes / Interference information: For SR-1, 2, SP-#, and Racer, the shoulder part interferes approximately 5 to 10mm with the B-pillar. For SR-1 and 2, the seat cushion side interferes slightly with the center console at the front end of the seat slide position. For Trend-J, JJ, and JC, the backrest side interferes approximately 5 to 10mm with the door armrest, and the seat cushion side interferes slightly with the center console at the front end of the seat slide position. For LX (including Ergomed), LS, and LT, the seat cushion side interferes slightly with the center console near the front end of the seat slide position (excluding LX-#F). If you are more concerned about the handlebar offset than the seating height, the RS/TS-# series can adjust the handlebar offset in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) For the RMS, adjust it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, it can be alleviated by adjustment. For the RCS, adjust it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: One position type Armrest: Can be installed on the right hand side of the left seat or the left hand side of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter Rally Special / First generation SR / SR-2 early model Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from the separately sold side adapter set or the two offset adapter sets for RS/TS-G. [Priority on seating position] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame. No side airbags, 2WD, 4WD. Keyless vehicles have not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
