RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR VOLKSWAGEN GOLF 2 JETTA 2 19 16 11.022.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

11.022.2

VOLKSWAGEN GOLF 2 JETTA 2 19 16

Model year: 1984-04-1992-03

Notes / Interference information: Please adjust the RMS to the optimum position (front-to-rear height, left-to-right offset 0/5/10mm) using the separately sold RMS side adaptor.
Position: 3 height settings available (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.)
Armrest: No installation examples, installation possibility unknown
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
CT
C-Classic
D / DH / DV
Pro Racer RMS RMS can be installed with the separately sold RMS side adapter . Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 Side adapter set (product number 1700000J) must be purchased separately. TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately.

(Note) This product cannot be installed on any seats other than those listed in the matching information below.

Images are for illustration purpose only. Actual product may vary.