RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR VOLKSWAGEN UP!AA 2011.001.1

$262.80 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL LEFT SEAT
Product Number
2011.001.1
Compatible Car
VOLKSWAGEN UP!AA
Product Description
Model year: 2012-10-2020-09
Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off. The seat height adjustment function is about 7mm higher than the lowest position and about 50mm lower than the highest position (when using ST-JJ). The handle offset of the Recaro seat is the same as the factory seat. The forward slide amount is about 10mm less than the factory. *There may be some interference between the belt buckle and the carpet on the console side.
Notes / Interference information: For SR-6, 7, 11 and AM19SPORT, Sportster, SP-X, the seat cushion and center console may interfere with each other by about 0 to 5 mm at the forward position of the seat slide position. For RMS, please adjust the position to the optimum position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RMS side adapter. In addition, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. One-position type.
Armrest: Can be installed on the right hand side of the left seat or the left hand side of the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 will require the separately sold SP-GN side adapter set . PRO RACER (RACER) SP-G/A You will need to purchase the side adapter set separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. The manual switch for the passenger airbag on the vehicle side will function normally.
Notes
Images are for illustration purpose only. Actual product may vary.