RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR VOLKSWAGEN POLO ABA-AWCHZ AWDAD AWCZP 2011.003.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2011.003.1

VOLKSWAGEN POLO ABA-AWCHZ AWDAD AWCZP

Model year: 2018-03-
Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position will be approximately 4mm lower than the lowest position of the factory seat height adjustment function (when using the New LX-F). If the seating position feels too low, use the included adapter frame to make it 34mm higher than the lowest position of the factory seat. The seat lateral position is approximately 15mm closer to the door than the factory seat. The slide position is 30mm shorter than the factory.
Notes / Interference information: SP-# and Racer require the SP-G offset adapter set (product number 1600094J). If you are more concerned about the handlebar offset than the seating height, the RS/TS-# series can adjust the handlebar offset in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.)) For the RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter. Any interference with the interior can also be alleviated by adjustment. For the RCS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. For the SR-6/7/11 and SPORT-JC, there is slight interference between the side of the seat cushion and the center console at the front of the slide rail.
Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . PRO RACER (RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set . AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set [Offset priority] Offset adapter set for RS/TS-G The handle offset can be adjusted to 5/10/15mm left and right. (The seating position is raised by +5mm.) SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Including GTI. Side airbag canceller included. Vehicles with optional features have not been confirmed. The passenger seat will be equipped with a warning light due to the seat occupancy sensor, so it can only be installed on the driver's seat.

Images are for illustration purpose only. Actual product may vary.