$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2012.005.1 |
| Compatible Car | AUDI Q3 8U### |
| Product Description | Model year: 2012-05-2020-07 Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light needs to be turned off. The seating position is approximately 68mm lower than the highest position of the factory seat height adjustment function when the center position of the three-stage adjustment is used, and is the same as the lowest position of the factory seat height adjustment function. (Adjustable 13mm up and 13mm down). (When using New LX-F). The seat offset is closer to the center of the steering wheel than the factory seat and is approximately 5mm toward the door (the Recaro moves closer to the door). The seat slide amount is reduced by approximately 10mm compared to the factory seat. Notes / Interference information: The console and seat cushion interfere with each other when the seat slide is in the forward position. SR-6, 7 (except 7F), 11: approx. 10mm, TREND, STYLE, SPORT: approx. 10-15mm, Sportster, SR-7F, LX-F, old LX, ERGOMED series: approx. 5mm, Cross Sportster: weak interference. There is weak interference between the belt buckle and the console. (The OEM only comes into contact with the console.) For the RMS, adjust the position to the optimum position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. For the RCS, adjust the position to the optimum position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. For the driver's seat. Side airbag canceller included. For the passenger seat, the warning light will be turned on by the seat occupancy sensor, so this product is only for the driver's seat. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
