$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2012.005.2 |
| Compatible Car | AUDI Q5 8R### |
| Product Description | Model year: 2009-06-2017-10 Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off. The seating position is approximately 50mm lower than the highest position of the factory seat height adjustment function when using the center position of the three-stage adjustment, and approximately 13mm higher than the lowest position of the factory seat height adjustment function. (Adjustable 13mm up and 13mm down). (When using New LX-F). The steering wheel offset is approximately 5mm toward the door side compared to the factory (Recaro moves closer to the door side). The seat slide amount is approximately 30mm less than the factory seat. Notes / Interference information: The console and seat cushion interfere with each other at the front position of the seat slide. SR-6, 7 (excluding 7F), 11 have weak interference, TREND, STYLE, SPORT have approximately 5mm interference. In addition, to move the handlebar offset to the center, please use the RS/TS-G offset adapter set (product number 1700001J) for RS/TS-# series. The handlebar offset can be adjusted in 5mm increments from 5mm to a maximum of 15mm. There may be slight interference between the belt buckle and the console. For RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before mounting. For RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before mounting. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W RS/TS-# series requires RS/TS-G offset adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. For the driver's seat. Q5 Hybrid is not confirmed, so it is unknown. Side airbag canceller included. The passenger seat is only for the driver's seat because the warning light is turned on by the seating sensor. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
