$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2012.515.2 |
| Compatible Car | VOLKSWAGEN POLO 6R |
| Product Description | Model year: 2009-10-2018-03 Special notes: The side airbag function built into the factory seat will be lost. For vehicles with side airbags, the airbag warning light must be turned off. The seating position will be raised by approximately 13 mm when the lowest position of the factory seat's three-stage adjustment is used compared to the lowest position. (Adjustable 13 mm upwards, 26 mm). (When using New LX-F). The steering wheel offset of the Recaro seat is 3 mm closer to the door than the factory seat (5 mm closer to the door from the steering wheel center). The slide position is reduced by 20 mm forward compared to the factory. Notes / Interference information: The seat belt buckle fixing bolt will interfere with the floor carpet on the console side by about 3 mm. Felt is included to reduce interference. When installed on Sportster, SR-6/7/11, the center console and the front end of the seat cushion will interfere with each other by a few mm from the 3rd notch from the front of the seat slide position (maximum 10 mm for Sportster). For RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. For RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter Rally Special / First generation SR / SR-2 early model Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Vehicles with optional features not confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
