$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2014.003.1 |
| Compatible Car | BMW X1 HS15 HS20 F48 |
| Product Description | Model year: 2015-10- Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position is approximately 10 mm lower than the lowest position of the factory seat height adjustment function, and approximately 70 mm lower than the highest position of the factory seat height adjustment function. (When using New LX-F). The steering wheel offset is approximately 15 mm closer to the door compared to the factory seat on the driver's side. The passenger seat is offset further toward the door to reduce interference with the center console at the front of the seat slide. The forward and rearward sliding distances are reduced by approximately 15 mm each compared to the lowest position of the factory seat height adjustment function. Notes / Interference information: Because the center console protrudes toward the passenger seat, there may be interference between the side of the seat cushion and the center console at the front of the seat slide depending on the individual differences. For RS/TS-# series, the offset of the steering wheel can be adjusted in 5mm increments from 5mm to a maximum of 15mm by using the offset adapter set for RS/TS-G (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) The center console shape is asymmetrical, so the offset of the base frame is different on the left and right. (The driver's seat is closer to the console than the passenger seat.) For RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. One-position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. F48. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
