RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR BMW MINI LN## LR## XT## XS## XM## XN## AND OTHERS F54 F55 F56 F57 2014.003.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2014.003.2

BMW MINI LN## LR## XT## XS## XM## XN## AND OTHERS F54 F55 F56 F57

Model year: 2014-04-
Special notes: The side airbag function built into the factory seat will be lost. For driver's seat. Airbag warning light must be turned off. The seating position will be approximately 4mm higher than the lowest position of the factory seat height adjustment function, and approximately 58mm lower than the highest position of the factory seat height adjustment function. (When using ST-JJ). The steering wheel offset is approximately 20mm closer to the door from the steering wheel center. The forward sliding amount is approximately 30mm less than the factory.
Notes / Interference information: SP-# and Racer require the SP-G offset adapter set (product number 1600094J). For RS/TS-# series, the RS/TS-G offset adapter set (product number 1700001J) allows the steering wheel offset to be adjusted in 5mm increments from 5mm to a maximum of 15mm. (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) For the Sportster, Cross Sportster, Ergomed, and old LX models, the reclining dial interferes with the B-pillar at the rear end of the slide rail. For the RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. If there is interference with the interior, it can be alleviated by adjustment. For the RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation. Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be mitigated by adjusting it. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-#, Racer requires the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 requires the separately sold SP-GN side adapter set . PRO RACER(RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set (product number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set [Priority on offset] Offset adapter set for RS/TS-G Handle offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. F54, F55, F56, F57 (2014.002.1 and 2014.002.2 for F56 were integrated into this part number after June 16, 2016. The only change is that a seat belt anchor has been added to the door side for F54 and F55. There is no change in the position.) Side airbag canceller included. Compatibility with models and vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.