RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR BMW X3 G01 TX20 TR20 2014.004.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2014.004.1

BMW X3 G01 TX20 TR20

Model year: 2017-10-
Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position will be approximately 2mm higher than the lowest position of the factory seat height adjustment function, and approximately 65mm lower than the highest position of the factory seat height adjustment function. (When using the New LX-F). The steering wheel offset is approximately 10mm closer to the door than the factory seat on the driver's side. The sliding amount is approximately 20mm less than the factory.
Notes / Interference information: SP-# and Racer require the SP-G offset adapter set (product number 1600094J). For RS/TS-# series, the RS/TS-G offset adapter set (product number 1700001J) allows the steering wheel offset to be adjusted in 5mm increments from 5mm to a maximum of 15mm. (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) For the AM19 SPORT, STYLE, and TREND models, the IS-05 SR-6, 7, and 11 models (excluding 7F), and the Sportster, the seat cushion and center console interfere by a few mm at the front end of the seat slide. For the RMS, please use the separately sold RMS side adapter to adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For the RCS, please use the separately sold RCS side adapter to adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) before installation. Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-#, Racer requires the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 requires the separately sold SP-GN side adapter set . PRO RACER(RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set (product number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set [Priority on offset] Offset adapter set for RS/TS-G Handle offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. G01. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.