RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR BMW Z4 G29 HF20 FOR GENUINE MANUAL SEAT 2014.007.1

$262.80 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL LEFT SEAT
Product Number
2014.007.1
Compatible Car
BMW Z4 G29 HF20 FOR GENUINE MANUAL SEAT
Product Description
Model year: 2019-03-
Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position will be approximately 3 mm lower than the lowest position of the factory seat height adjustment function. (When using the New LX-F). The steering wheel offset of the Recaro is 12 mm closer to the door. It is 10 mm closer to the door compared to the factory seat. The slide amount is the same as the factory. *Only the power recliner can be installed on the Sportster and Cross Sportster.
Notes / Interference information: We recommend that the RMS and RS/TS-G are offset 5 mm toward the console side to reduce interference with the door side. For the RMS, adjust the position to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RMS side adapter before installing. For the RS/TS-# series, the steering wheel offset can be adjusted in 5 mm increments from 5 mm to a maximum of 15 mm using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult with your dealer regarding interference with the console side (shift, etc.)). *Manual recliners are not compatible with the Sportster and Cross Sportster, but power recliners can be installed. AM19 series (SPORT, STYLE, TREND) and IS-84 series (ERGOMED and ORTHOPAD) are not compatible due to interference with the belt anchor due to their structure. For details, please contact a dealer who is familiar with this vehicle. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. One-position type.
Armrest: Cannot be installed
Compatible seats: LX-F (IS-05 base)
Pro Racer RMS Please adjust the RMS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter (product number 1700002J) before installing. Also, if there is interference with the interior, it can be mitigated by adjustment. RCS RCS should be adjusted to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from the two types of side adapter set or RS/TS-G offset adapter set (sold separately). [Seating position priority] Side adapter set [Offset priority] RS/TS-G offset adapter set Handle offset can be adjusted left/right by 5/10/15mm. (Seating position is raised by +5mm.) SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster Please inquire (special mounting and special base frame are required) CrossSportster Please inquire (special mounting and special base frame are required)
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. G29. Base frame for genuine manual seats. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.
Notes
Images are for illustration purpose only. Actual product may vary.