RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR BMW 2 DBA-1J20 1J30 1H30 F22 AND F87 M2 2014.024.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2014.024.2

BMW 2 DBA-1J20 1J30 1H30 F22 AND F87 M2

Model year: 2014-02-
Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position will be approximately 3mm lower than the lowest position of the factory seat height adjustment function, and approximately 56mm lower than the highest position of the factory seat height adjustment function. (When using ST-JJ). Compared to the factory seat, the Recaro handlebar offset is approximately 19mm closer to the door. The forward sliding amount is approximately 30mm less than the factory.
Notes / Interference information: SP-# and Racer require the SP-G offset adapter set (product number 1600094J). For RS/TS-# series, the RS/TS-G offset adapter set (product number 1700001J) allows the handlebar offset to be adjusted in 5mm increments from 5mm to a maximum of 15mm. (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, this can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-#, Racer requires the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 requires the separately sold SP-GN side adapter set . PRO RACER(RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set (product number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set [Priority on offset] Offset adapter set for RS/TS-G Handle offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. F22, including F87 (M2) Side airbag canceller included. Cannot be installed on vehicles equipped with genuine seat active headrests. Compatibility with vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.