$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2014.025.2 |
| Compatible Car | BMW 3 ABA-VA20 VA40 ABA-VB23 25 ABA-WD40 E90 91 92 |
| Product Description | Model year: 2005-04-2011-12 Notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position is almost the same as the factory seat (when using ST-JJ). The seat offset is about 25mm toward the door side (the Recaro is closer to the door side). The forward slide amount is about 30mm less than the factory seat. However, when installing RS-#/TS-#, by using the RS/TS-G offset adapter set (product number 1700001J), the seat offset will be 10mm from the center of the steering wheel, with the Recaro closer to the door side. (The position will be the same as the factory seat.) When installing SP-G#, the SP-G offset adapter set (product number 1600094J) will be used, so the seat offset will be about 5mm from the center of the steering wheel, with the Recaro closer to the door side. Model year guideline For vehicles manufactured up to September 2008, if you wish to install a Recaro seat on the passenger seat, you must have a Recaro dealer install the separately sold NaviSeat Selector Type 2 (product number 7214388) for early models, or NaviSeat Selector Type 2-A (product number 7215870) for later models with seating sensors. Notes / Interference information: CS, CSE, CT, and C-clutch use spacers, so the seating position will be higher by the amount of the spacer. For RS/TS-# series, the steering offset can be adjusted in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). For SP-#, the SP-G offset adapter set (product number 1600094J) is required. (When installing, please consult your dealer regarding interference with the console side (shift, etc.)) Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, this can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. One-position type. Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE CT C-Classic Pro Racer RMS RMS is an optional RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter Rally Special / First generation SR / SR-2 early model Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. E90, E91, E92. Side airbag canceller included. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
