$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2014.071.2 |
| Compatible Car | BMW Z4 BT E85 86 |
| Product Description | Model year: 2003-01-2009-03 Special notes: The seating position is almost the same as the original seat (when using ST-JJ center hole). The seat offset is about 10 mm toward the door (Recaro moves toward the door). The side of the seat cushion interferes with the center console near the front end of the sliding position. The seat interferes with the vehicle, so the rearward sliding is reduced. Model year guideline For vehicles manufactured up to December 2005, if you are installing a Recaro seat on the passenger seat, you must have a Recaro dealer install the separately sold NaviSeat Selector Type 1 (product number 7214387). Model year guideline For vehicles manufactured after January 2006, if you are installing a Recaro seat on the passenger seat, you must have a Recaro dealer install the separately sold NaviSeat Selector Type 2 (product number 7214388). Notes / Interference information: For LX (including Ergomed series), LS, and LT, the backrest side and door armrest interfere by about 5 mm. For SR-3, 4, and 5, the backrest side and door armrest interfere by about 15 to 20 mm, the seat cushion side and center console interfere by about 10 to 15 mm, and the shoulder part interferes with the door by about 5 mm. For new A-8, the seat cushion side and center console interfere by about 10 to 15 mm. For SP-#N, the shoulder part interferes with the door by about 5 to 10 mm. For Style-J, JJ, JC, D, DC, and JS, the backrest width adjustment is set to the narrowest setting when installed. For Sport-J, JJ, JC, D, and DC, the backrest side and door armrest interfere by about 15 to 20 mm. If you are more concerned about the steering wheel offset than the seating height, the steering wheel offset for RS/TS-# series can be adjusted in 5 mm increments from 5 mm to a maximum of 15 mm by using the offset adapter set for RS/TS-G (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before mounting. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before mounting. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter Late model A-8 Early model A-8 SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. E85, 86. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
