$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2080.006.1 |
| Compatible Car | TOYOTA AURIS E181 186 |
| Product Description | Model year: 2012-08-2018-03 Special notes: The side airbag built into the factory seat will no longer function. The airbag warning light must be turned off. (Only applicable to vehicles with side airbags). The seating position is approximately 17mm higher (13mm up, 13mm down) when the 3-step adjustment is in the middle position compared to the lowest position of the factory seat height adjustment function. Also, it is approximately 46mm lower (13mm up, 13mm down) when the 3-step adjustment is in the middle position compared to the highest position of the factory seat height adjustment function. (When using ST-JJ). The seat lateral position is the same as the factory seat. The slide position is 20mm shorter forward compared to the factory. If a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be illuminated. Notes / Interference information: Please adjust the RMS to the optimal position (front-rear height, left-right offset 0/5/10mm) using the RMS side adapter sold separately. Also, if there is any interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. For 2WD vehicles. Compatibility with cold weather models, 4WD vehicles, and vehicles equipped with optional items has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
