$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2080.010.1 |
| Compatible Car | TOYOTA NOAH VOXY ESQUIRE ZWR80 |
| Product Description | Hybrid Special notes: The side airbag built into the factory seat will no longer function. The airbag warning light must be turned off. (Only applicable to cars with side airbags). The seating position is 10mm higher than the lowest position of the factory seat height adjustment function (50mm lower than the highest position). (When using a 6mm spacer and New LX-F). The seat offset is approximately 3mm toward the console (the Recaro seat moves closer to the console). The slide position is 20mm shorter forward than the factory. If a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be illuminated. The vehicle's factory seat rail cover is used for installation in the driver's seat. For details, please refer to the instruction manual attached to the product. Cautions / Interference information: When the seat is slid forward, the seat cushion and center console will interfere with each other as follows. For IS-05 SR series (SR-6/7/11)/LX series, IS-84 LX series/Ergomed series, Sportster/Cross Sportster, New ORTHOPAD, AM19 series (SPORT/TREND/STYLE-JC, JJ, DC, the seat side urethane will be pressed and interfere with the seat from the front end to the slide position of 5 to 20 mm. For RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter. Position: New structure frame. One-position type. Armrest: Can be installed for the right hand of the left seat or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter RCS RCS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Hybrid vehicles. Side airbag canceller included. Please read the notes carefully as there are special notes for each seat. Vehicles with optional equipment such as cold weather specifications have not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
