$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2080.011.1 |
| Compatible Car | TOYOTA YARIS GXPA16 MXPA12 |
| Product Description | Model year: 2020-07- Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off. The seating position is approximately 23 mm higher when using the center position of the three-stage adjustment compared to the lowest position of the factory seat height adjustment function (adjustable 13 mm up and 13 mm down). (When using New LX-F). The Recaro seat's steering wheel offset is approximately 20 mm toward the door from the center of the steering wheel (6 mm toward the door than the factory seat). The slide amount is 40 mm shorter than the factory. If a Recaro seat without SBR is installed on the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not turn on, but if a Recaro seat with SBR is installed, the function will be maintained as is. Notes / Interference information: The following seats have different restrictions for the driver's seat and passenger seat because the consoles of the vehicle are different on the left and right. When installing the Sportster driver's seat, the seat cushion side and center console will interfere with each other by about 5mm from 20mm from the front end of the slide. For the passenger seat, the seat cushion side and center console will interfere with each other as follows from 50mm from the front end of the slide. For the Sportster, the interference is up to 15mm. For the SR-6, 7, and 11, the interference is about 8mm. For the SR-7F and LX-F, the interference is about 5mm. For the Ergomed series, the interference is about 16mm. For both the driver's and passenger's seats, the SP-G offset adapter set (product number 1600094J) is required for the SP-# and Racer. When installing the RS-G/TS-G, if you are more concerned about the steering wheel offset than the seating height in the driver's seat, you can adjust it by using the separately sold offset adapter (product number 1700001J). For the RMS, the separately sold RMS side adapter can be used to adjust the optimal position (front-to-back height, left-to-right offset 0/5/10mm). Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. GR Yaris. Side airbag canceller included. Compatibility with models and vehicles with options other than those listed has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
