$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2080.011.1 |
| Compatible Car | TOYOTA COROLLA COROLLA NRE210 W ZWE211 W ZRE212 W ZWE214 W |
| Product Description | Touring Special notes: The side airbag built into the factory seat will no longer function. The airbag warning light needs to be turned off. The seating position is 37mm higher when using the center position of the 3-step adjustment compared to the lowest position of the factory seat height adjustment function (adjustable 13mm up and 13mm down). (When using the New LX-F). The Recaro seat's handle offset is approximately 15mm toward the door from the center of the handle (12mm toward the door than the factory seat). The slide amount is 40mm shorter than the factory. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be turned on. Notes / Interference information: For the following seats, the side of the seat cushion will interfere with the center console when the passenger seat is slid forward. For SPORT, STYLE, and TREND JJ, JC, and DC, it is approximately 8-10mm, for SR-6, 7, and 11 it is approximately 10mm, and for SR-7F, LXF, old LX, and Ergomed it is approximately 3mm. When installing RS-G/TS-G, if you are more concerned about the steering wheel offset than the seating height in the driver's seat, you can adjust it by using the separately sold offset adapter (product number 1700001J). An offset adapter is required on the passenger side as it interferes with the door pillar. In addition, SP-# cannot be installed due to large interference with the B-pillar when matching, but it can be installed on the driver's seat by using the SP-G offset adapter set (product number 1600094J). Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types: a separately sold side adapter set or an offset adapter set for RS/TS-G. [Priority on seating position] Side adapter set SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
