RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA CROWN CROSSOVER TZSH35 AZSH35 2080.011.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2080.011.1

TOYOTA CROWN CROSSOVER TZSH35 AZSH35

Model year: 2022-09-
Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off.
Cautions / Interference information: For RS/TS-# series, please install with the RS/TS-G offset adapter set (product number 1700001J). RMS can be adjusted to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter. RCS can be adjusted to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. When installing SR-7, SR-6, SR-11, and Sportster, the seat cushion and console will interfere slightly at the front of the slide. There will be a maximum of 7mm of interference from the 2nd notch from the very front of the slide.
Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-#, Racer requires the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 requires the separately sold SP-GN side adapter set . PRO RACER(RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set (product number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, both sold separately. [Priority on seating position] Side adapter set [Priority on offset] Offset adapter set for RS/TS-G Handle offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.