RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA COROLLA SPORTS E21# 2080.011.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2080.011.1

TOYOTA COROLLA SPORTS E21#

Model year: 2018-06-
Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off. The seating position is 23mm higher when using the center position of the 3-step adjustment compared to the lowest position of the factory seat height adjustment function (adjustable 13mm up and 13mm down). (When using New LX-F). The Recaro seat steering wheel offset is 8mm toward the door from the center of the steering wheel (2mm toward the door than the factory seat). The slide amount is 40mm shorter than the factory. When installing a Recaro seat on the passenger seat, the occupant detection sensor will not function and the seat belt warning light will not turn on.
Notes / Interference information: Even if it can be installed on the driver's seat, there are restrictions as follows due to the narrow space on the passenger seat side. When using RS-G/TS-G on the passenger seat, the RS/TS-# series requires the RS/TS-G offset adapter set . For the driver's seat, you can use the RS/TS-G adapter set (part number 1700000J) sold separately. When installing the RMS on the passenger seat, use the RMS side adapter set (part number 1700002J) sold separately to offset the seat to a position where there is no interference with the door side. For the following seats, the seat cushion side and center console will interfere with each other when the passenger seat slides forward. For SPORT, STYLE, and TREND JJ, JC, and DC, it is about 8-13 mm, for SR-6, 7, and 11, it is about 10 mm, for SR-7F, New LX-F, Cross Sportster, old LX series, and Ergomed, it is about 3 mm, and for Orthoped and Sportster, it is about 6 mm. For the RMS, adjust the position to the optimum position (front/rear height, left/right offset 0/5/10 mm) using the RMS side adapter sold separately. If there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro Vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・RCS side adapter ・RCS stainless steel side adapter set AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W RS/TS-# series requires RS/TS-G offset adapter set . *Normal side adapter (Product number 1700000J) cannot be used. SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.