RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR TOYOTA VITZ NCP131 NHP130 2080.023.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2080.023.2

TOYOTA VITZ NCP131 NHP130

Model year: 2010-12-2020-02
Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. (Only applicable to vehicles with side airbags). The seating position can be adjusted up to 40mm up and down to 20mm down by combining the included adapter frame and spacer compared to the lowest position of the factory seat. (When using the New LX-F). The handle offset of the Recaro seat is the same as the factory seat. The forward sliding amount is reduced by about 20mm compared to the factory.
Notes / Interference information: Armrests are not allowed because they interfere with the 5MT and low position. Please adjust the RMS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. One position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 will require the separately sold SP-GN side adapter set . PRO RACER (RACER) SP-G/A You will need to purchase the side adapter set separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame (with adapter frame) for NCP131 (RS, etc.) and NHP130 (hybrid released in January 2017). 2WD vehicles. Side airbag canceller included. Compatibility with 4WD vehicles (135 series) has not been confirmed. *From August 2018, the model will be switched from 2080.005.1/2.

Images are for illustration purpose only. Actual product may vary.