$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2080.031.1 |
| Compatible Car | TOYOTA CROWN AZSH20 |
| Product Description | Model year: 2018-06- Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light must be turned off. The seating position is approximately 25 mm higher when using the adapter frame compared to the lowest position of the factory seat height adjustment function (approximately 13 mm lower when not using the adapter frame). (When using New LX-F). The Recaro seat steering wheel offset is the same as the factory one, approximately 5 mm from the center of the steering wheel toward the door. The slide amount is 40 mm shorter than the factory one. When a Recaro seat is installed in the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will no longer be illuminated. Notes / Interference information: For the following seats, the side of the seat cushion will interfere with the center console when the seat slide is in the forward position (up to 30 mm from the forwardmost slide position). SPORTSTER: 5mm, SPORT, STYLE, TREND JJ, JC, DC: 5-10mm, SR-6, 7, 11: 10mm, SR-7F, LXF, old LX, Ergomed: 3mm. When installing RS-G/TS-G, if you are more concerned about the steering wheel offset than the seating height in the driver's seat, you can adjust it by using the separately sold offset adapter (product number 1700001J). For SP-#/Racer, please use the SP-G offset adapter set (product number 1600094J) to avoid interference with the B-pillar. For RCS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) with the separately sold RCS side adapter before installing. Position: New structure frame. One position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame (with adapter frame) and side airbag canceller included. Confirmed on Crown Hybrid AZSH20. Compatibility with ARS220/AZSH21/GWS224 and vehicles with optional items has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
