RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR DAIHATSU TAFT LA900S 2080.033.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2080.033.2

DAIHATSU TAFT LA900S

Model year: 2020-06-
Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off.
Cautions/Interference information: For the following seats, the seat cushion side and center console will interfere with each other in front of the seat slide (interference near the frontmost position). Sportster/Cross Sportster 3mm. For the RS/TS-# series, the normal side adapter (product number 1700000J) can be used, but if you are more concerned about the handlebar offset than the seat height, the RS/TS-# series can adjust the handlebar offset in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). For the RMS, the optional RMS side adapter can be used to adjust the position to the optimum (front-to-back height, left-to-right offset 0/5/10mm). For the RCS, the optional RCS side adapter can be used to adjust the position to the optimum (front-to-back height, left-to-right offset 0/5/10mm).
Position: New structure frame. English: Choose from 3 heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.)
Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS For the RMS, please adjust to the optimal position (front/back height, left/right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to prepare the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . You will need to purchase the PRO RACER(RACER) SP-G/A Side Adapter Set (product number 1700000J) separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of offset adapter sets for RS/TS-G or the side adapter set sold separately. [Priority on seating position] Side adapter set [Priority on offset] Offset adapter set for RS/TS-G Handle offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Not confirmed for 4WD vehicles. Compatibility with vehicles equipped with optional items not confirmed.

Images are for illustration purpose only. Actual product may vary.