RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA NOAH VOXY MZRA90W MZRA95W ZWR90W ZWR95W 2080.045.1

$268.06 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL LEFT SEAT
Product Number
2080.045.1
Compatible Car
TOYOTA NOAH VOXY MZRA90W MZRA95W ZWR90W ZWR95W
Product Description
Model year: 2022-01-
Special notes: The factory seat built-in side airbag function will be lost. The airbag warning light must be turned off. (Only applicable to vehicles with side airbags). The seating position will be raised by 12 mm when using the lowest position of the 3-step adjustment compared to the lowest position of the factory seat height adjustment function (adjustable 13 mm upwards, 26 mm, when using New LX-F). The seat offset is approximately 9 mm toward the console (approximately 13 mm from the steering wheel center). The slide amount is 40 mm shorter forward compared to the factory.
Notes / Interference information: The seat cushion and center console will interfere with each other in the forward position of the seat slide as follows. The shape of the center console is different on the left and right, so the interference with the left seat is greater. For all seats, the right seat will interfere by about 2 mm near the front end of the slide. The left seat will interfere by a maximum of about 30 mm, so it is not possible to slide the seat about 8 notches from the front end. Please install the RMS after adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter. If there is any interference with the interior, it can be alleviated by adjustment. Please install the RCS after adjusting it to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter.
Position: New structure frame. English: Choose from 3 height levels (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.)
Armrest: Can be installed for right hand use on the left seat, and left hand use on the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS For the RMS, please adjust to the optimal position (front/back height, left/right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is any interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Includes hybrid vehicles. Side airbag canceller included. Vehicles with optional equipment such as cold weather specifications have not been confirmed. When installing on the passenger seat, a Recaro seat equipped with SBR is required. Due to a revision of regulations from September 2020, it is now mandatory to equip the passenger seat with SBR (seat belt reminder).
Notes
Images are for illustration purpose only. Actual product may vary.