RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA LAND CRUISER J80 SEAT BELT BUCKLE ATTACHED TO THE SEAT 2080.128.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2080.128.1

TOYOTA LAND CRUISER J80 SEAT BELT BUCKLE ATTACHED TO THE SEAT

Model year: 1992-08-1997-12
Special notes: The seating position is almost the same as the original seat (when using ST-JJ). Seat offset is about 30mm on the door side (Recaro is closer to the door side).
Notes / Interference information: The seating position is higher for CS and CSE because a spacer is used. For SR-3, 4, 5, Sport-J, JJ, JC, D, and DC, the backrest side and door armrest interfere with each other by about 5 to 10 mm. For SP-#, the SP-G offset adapter set (product number 1600094J) is required. For Trend-J, JJ, JC, D, and DC, the backrest side and door armrest interfere with each other by about 10 to 15 mm. For RS/TS-#, the RS/TS-G offset adapter set (product number 1700001J) allows the steering wheel offset to be adjusted in 5mm increments from 5mm to a maximum of 15mm. (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, this can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. One-position type.
Armrest: Left hand armrest can be attached to the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
Pro Racer RMS RMS is an optional RMS side adapter Please adjust the RMS to the optimal position (front-rear height, left-right offset 0/5/10mm) before installation. In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G, sold separately. [Priority on seating position] Side adapter set [Priority on offset] Offset adapter set for RS/TS-G Handle offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. The type where the seat belt buckle is attached to the seat.

Images are for illustration purpose only. Actual product may vary.