RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR TOYOTA VANGUARD ACA33W ACA38W GSA33W 2080.254.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2080.254.2

TOYOTA VANGUARD ACA33W ACA38W GSA33W

Model year: 2007-08-2013-11
Special notes: The seating position is almost the same as the lowest end of the up/down adjustment position of the genuine seat when using the center position of the 3-stage adjustment (when using the center hole of ST-JJ). The seat side position is 3mm closer to the console than the genuine seat. The front slide position is 20mm shorter on the driver's side and 20mm longer on the passenger side compared to the genuine seat. The driver's seat position sensor needs to be relocated.
Notes / Interference information: For SR-1, 2, 3, 4, and 5, there is a possibility that the seat cushion and center console may interfere with each other at the front position of the seat slide due to individual differences. For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. 3 heights available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please do a trial fit before installation.)
Armrest: Not available
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
Pro Racer RMS Please adjust the RMS to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). PRO RACER (RACER) SP-G/A side adapter set (product number 1700000J) must be purchased separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. 2WD and 4WD vehicles. Side airbag canceller included. Compatibility with cold weather models and vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.