$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2080.526.2 |
| Compatible Car | TOYOTA COROLLA FIELDER COROLLA AXIO E141 142 |
| Product Description | Model year: 2006-10-2012-05 Special notes: Almost the same as the lowest position of the genuine seat (when using ST-JJ upper holes), but cutting of the legs is required. No cutting is required for middle and lower holes. The forward sliding distance is reduced by about 20mm compared to genuine. There is some interference between the side of the seat cushion and the center console near the front end of the sliding position. Notes / Interference information: The CS, CSE, CT and C-class seats use spacers, so the seating position will be higher by the amount of the spacer. For the RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For the RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Cannot be installed Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE CT C-Classic Pro Racer RMS RMS can be installed using the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set (product number 1700000J) separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Vehicles without side airbags, 2WD vehicles. Compatibility with cold weather models and vehicles equipped with optional items has not been confirmed. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
