RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR TOYOTA LAND CRUISER PRADO J150 2080.628.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2080.628.2

TOYOTA LAND CRUISER PRADO J150

Model year: 2009-09-
Special notes: The factory seat built-in side airbag function will be lost. Airbag warning light must be turned off. The forward slide amount is reduced by approximately 20 mm compared to the factory seat. The seating position is almost the same as the lowest position of the factory seat (when using ST-JJ center hole). The driver's seat is not equipped with a seat position sensor function.
Notes / Interference information: SP-# requires the SP-G offset adapter set (product number 1600094J). CS, CSE, CT, and C-class seats use spacers, so the seating position will be higher by the amount of the spacer. For RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.)
Armrest: Cannot be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
CT
C-Classic
Pro Racer RMS RMS can be installed using the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . For PRO RACER(RACER) SP-G/A SP-# and Racer, you will need the separately sold SP-G Offset Adapter Set (Part number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold Side Adapter Set (Part number 1700000J). SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Vehicles equipped with pre-crash safety systems have not been confirmed. Compatibility with cold weather models and vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.