RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR TOYOTA ESTIMA AHR20 PASSENGER SEAT 2080.735.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2080.735.1

TOYOTA ESTIMA AHR20 PASSENGER SEAT

Hybrid
Special notes: The seating position is almost the same as the lowest position of the genuine seat (when using ST-JJ center hole). The forward sliding amount is reduced by about 20mm compared to the genuine seat.
Notes / Interference information: For SR-1 and 2, the shoulder part and B-pillar interfere by about 10 to 15mm, and the backrest side and door armrest interfere by about 10 to 15mm. For SR-3, 4, 5, Orthoped, Trend, Style, Sport J, JJ, JC, D, and DC, the backrest side and door armrest interfere by about 10 to 15mm. For SP-# and Racer, the SP-G offset adapter set (product number 1600094J) is required. For CS and CSE, the backrest side and door armrest interfere by about 5 to 10mm, and the seating position will be higher by the amount of the spacer due to the use of a spacer. For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the RMS side adapter sold separately. Also, if there is any interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. English: Choose from 3 height levels (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.)
Armrest: Cannot be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
Pro Racer RMS For the RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is any interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / Early SR-2
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . For PRO RACER(RACER) SP-G/A SP-# and Racer, you will need the separately sold SP-G Offset Adapter Set (Part number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold Side Adapter Set (Part number 1700000J). SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Passenger seat frame. No side airbag. Compatibility with cold weather models and vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.