RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR NISSAN X-TRAIL T32 T32 NT32 HT32 HNT32 2081.004.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2081.004.2

NISSAN X-TRAIL T32 T32 NT32 HT32 HNT32

Model year: 2013-12-
Special notes: The factory seat built-in side airbag function will be lost. The airbag warning light needs to be turned off. The seating position is 5mm higher when using the center position of the 3-step height adjustment function compared to the lowest position (adjustable 13mm up and 13mm down). (When using New LX-F). The handle offset of the Recaro seat is approximately 10mm closer to the door compared to approximately 5mm closer to the door for the factory seat. The slide position is 20mm shorter forward compared to the factory.
Notes / Interference information: Due to the large center console, there is interference between the side of the seat cushion and the center console at the front position of the seat slide. The interference on the passenger side is especially large, with Orthoped, AM19 Sport/Trend/Style, IS-05 SR-6/7/11/ and about 15mm interference, while the IS-05 SR-7F, LX-F, AM190 Sport Star, IS-84 old LX, and Ergo interfere by about 10mm. SP-X interferes by a few mm. On the driver's side, Orthoped, AM19 Sport/Trend/Style, and IS-05 SR-6/7/11/ interfere by a few mm. For RS/TS-# series, the steering offset can be adjusted in 5mm increments from 5mm to a maximum of 15mm using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.). For RMS, adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is any interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 side adapter set must be purchased separately. PRO RACER (RACER) SP-G/A side adapter set must be purchased separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set [Offset priority] Offset adapter set for RS/TS-G The handle offset can be adjusted to 5/10/15mm left and right. (The seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Gasoline and hybrid 2WD and 4WD vehicles. Compatibility with vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.