$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2081.005.2 |
| Compatible Car | NISSAN SERENA C27 |
| Product Description | Model year: 2016-08- Special notes: The side airbag function built into the factory seat will be lost. Vehicles equipped with side airbags will need to have the airbag warning light turned off. When a Recaro seat is installed on the passenger seat, the occupant detection sensor will no longer function and the seat belt warning light will not be turned on. The seating position will be approximately 13mm higher when using the center position of the 3-stage adjustment compared to the lowest position of the factory seat height adjustment function. (Adjustable 13mm up and 13mm down). (When using New LX-F). The seat slide amount is approximately 20mm less than the factory. The seat offset is the same as the j factory seat. Notes / Interference information: When installing a Sportster/Cross Sportster and using the vehicle's sliding center console in the front, there are the following restrictions to avoid interference with the center console. For Cross Sportster, install the seat at the center position of the 3-stage adjustment or higher, or if installing it at a low lower position, remove the recliner cover and attach felt to prevent scratches. For Sportster, please install it in the upper position of the 3-step adjustment, or if you install it below the middle position, remove the recliner cover and attach felt to prevent scratches. In addition, the console and seat cushion will interfere with each other at the forward position of the seat slide. SR-6, 7 (excluding 7F), 11, TREND, STYLE, SPORT: approx. 5-10 mm. Orthoped.: approx. 10 mm. Sportster: weak interference. SR-6, 7, 11: seat backrest side and B-pillar interfere with each other by approx. 5 mm. For RCS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10 mm) using the separately sold RCS side adapter before installing. Position: New structure frame. 3 height settings available (For some models, the legs of the slide rail need to be cut depending on the installation position. Please test fit before installation.) Armrest: Not compatible Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types.・Side adapter for RCS AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with vehicles with optional items not confirmed. Cannot be installed on Serena e-POWER. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
