RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR NISSAN NOTE HE12 SNE12 E-POWER 2081.006.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2081.006.2

NISSAN NOTE HE12 SNE12 E-POWER

Model year: 2016-11-2020-12
Special notes: The side airbag function built into the original seat will be lost. The airbag warning light must be turned off. The seat height is approximately 2 mm lower than the lowest position of the original seat height adjustment function (can be set 6 mm or 13 mm lower with the included spacer) (when using ST-JJ). The handle offset of the Recaro seat is the same as the original seat. The forward slide amount is approximately 20 mm less than the original.
Notes / Interference information: For LX (including Ergomed series), LS, and LT, the recliner dial on the center console must be replaced with a thin recliner dial . For LX (including Ergomed series) and LS with a round recliner dial, remove the recliner dial on the center console. This is excluded because it cannot be installed on the passenger seat, but SP-# can be installed on the driver's seat only by using the SP-G offset adapter set . Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. If there is any interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. One-position type.
Armrest: Can be installed on the right hand side of the left seat, or the left hand side of the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle Classic LX Pepita / Classic LX Spektrum Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle LX-F (IS-05 base)
LS / LS-# / LT-# Replace with a thin recliner dial (sold separately) to avoid (reduce) interference with the vehicle Pro Racer RMS RMS can be installed with the separately sold RMS side adapter Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. If there is any interference with the interior, it can be mitigated by adjustment. RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS ・Stainless steel side adapter set for RCS AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
You will need to purchase the TS-G / RS-G / TS-W / RS-W side adapter set separately. SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. "e-POWER exclusive" side airbag canceller included. Compatibility with vehicles equipped with optional items has not been confirmed.

Images are for illustration purpose only. Actual product may vary.