RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR NISSAN SERENA E-POWER HC27 HFC27 DRIVER'S SEAT 2081.011.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2081.011.2

NISSAN SERENA E-POWER HC27 HFC27 DRIVER'S SEAT

Model year: 2019-08-
Special notes: The side airbag function built into the factory seat will be lost. The airbag warning light needs to be turned off. The seating position is approximately 20mm higher when using the center position of the three-stage adjustment compared to the lowest position of the factory seat height adjustment function (adjustable 13mm up and 13mm down). (When using the New LX-F). There is no handle offset for the Recaro seat. The sliding distance is 20mm shorter than the factory.
Notes / Interference information: Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. 3 height options available (For some car models, the legs of the slide rail need to be cut depending on the installation position. Please perform a trial fit before installation.)
Armrest: Left hand side for right seat can be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS is installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter . In addition, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 will require the separately sold SP-GN side adapter set . PRO RACER (RACER) SP-G/A You will need to purchase the side adapter set separately. AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. Driver's seat frame (right seat). Side airbag canceller included. Compatibility with models and vehicles with options other than those listed has not been confirmed.

Images are for illustration purpose only. Actual product may vary.