$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2081.025.1 |
| Compatible Car | NISSAN MARCH K13 |
| Product Description | Model year: 2010-07- Special notes: The seating position is almost the same as the lowest position of the genuine seat (when using ST-JJ center hole). Seat offset is about 15mm toward the door (Recaro moves closer to the door). The forward sliding amount is reduced by about 20mm compared to genuine. Notes / Interference information: For CS and CSE, the backrest side and door armrest interfere slightly. The seating position is higher due to the use of a spacer. For SR-3, 4, 5, the backrest side and door armrest interfere about 5 to 10 mm, and the seat cushion side and door interfere slightly. For new A-8 and A-8, the shoulder part interferes slightly with the B-pillar. For Trend-J, JJ, JC, D, DC, the backrest side and door armrest interfere about 10 to 15 mm. For Style-J, JJ, JC, D, DC, the backrest side and door armrest interfere slightly. For Sport-J, JJ, JC, D, and DC, the backrest side and door armrest interfere with each other by about 5 to 10 mm. For RS/TS-# series, the offset of the handlebars can be adjusted in 5 mm increments from 5 mm to a maximum of 15 mm by using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) For RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter before installing. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE Pro Racer RMS For the RMS, use the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Late model A-8 Early model A-8 AM19 TREND-J/JJ/JC AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / For RS-W RS/TS-# series, please choose from two types: the side adapter set or the offset adapter set for RS/TS-G, both sold separately. [Seating position priority] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. No side airbags. 2WD vehicles. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
