$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL LEFT SEAT |
| Product Number | 2081.040.1 |
| Compatible Car | NISSAN ELGRAND E52 |
| Product Description | Model year: 2010-08- Special notes: The side airbag function built into the factory seat will be lost. Airbag warning light must be turned off. The seating position is approximately 34mm higher when using the top position of the 3-step adjustment compared to the lowest position of the factory seat height adjustment function (= almost the same as the center position of the factory seat height adjustment function), approximately 21mm higher when using the center position, and approximately 8mm higher when using the bottom position. (When using ST-JJ). The seat offset is approximately the same as the factory seat position. (= steering wheel center offset is 0) The forward sliding amount is reduced by approximately 20mm compared to the factory. Notes / Interference information: The seating position is higher for CS and CSE because a spacer is used. For RMS, please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RMS side adapter before installation. In addition, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, and for the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE Pro Racer RMS For the RMS, use the separately sold RMS side adapter (product number 1700002J). Please adjust to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation. Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent) RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) before installation using the separately sold RCS side adapter. *Please choose from the following two types.・Side adapter for RCS Late model A-8 Early model A-8 AM19 TREND-J/JJ/JC AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / You will need to purchase the RS-W Side Adapter Set (product number 1700000J) separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included. Compatibility with cold weather models and vehicles equipped with optional items has not been confirmed. In addition, if you install a Recaro seat on the passenger seat, the ottoman function will be lost. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
