RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR NISSAN SILVIA 180SX S13 14 15 SPORTS FRAME DRIVER'S SEAT 2081.089.2

$268.06 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL RIGHT SEAT
Product Number
2081.089.2
Compatible Car
NISSAN SILVIA 180SX S13 14 15 SPORTS FRAME DRIVER'S SEAT
Product Description
Model year: 1988-05-2002-08
Special notes: The seating position is about 5mm lower than the original seat (when using ST-JJ). The handle is offset about 15mm toward the door side (Recaro moves closer to the door side). The forward and backward sliding amount is reduced by about 40mm compared to the original. The side of the seat cushion interferes with the center console at the front of the sliding position. Because the slide rail is offset toward the rear seat feet (about 150mm) to lower the seating position, it may interfere with the roll cage or damage the floor carpet.
Notes / Interference information: For SR-3, 4, and 5, the backrest side interferes with the door armrest by about 5 to 10mm, and the shoulder part interferes with the B-pillar by about 5 to 10mm. For new A-8 and A-8, the shoulder part interferes with the B-pillar by about 5 to 10mm. If you want to install SP-# or Racer on S14, you will need the SP-G offset adapter set (product number 1600094J). For SP-#N, the shoulder part and B-pillar interfere by approximately 10 to 15 mm. For RCS, adjust the position to the optimum position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. One position type.
Armrest: Cannot be installed
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
RCS For RCS, adjust the position to the optimum position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . PRO RACER (RACER) SP-G/A SP-#, Racer requires the separately sold SP-G offset adapter set (product number 1600094J). SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame. No side airbags, frame for driver's seat only.
Notes
Images are for illustration purpose only. Actual product may vary.