RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR NISSAN SERENA C26 DRIVER'S SEAT 2081.265.2

$262.80 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL RIGHT SEAT
Product Number
2081.265.2
Compatible Car
NISSAN SERENA C26 DRIVER'S SEAT
Product Description
Model year: 2010-11-2016-07
Special notes: The seating position is 5mm higher than the lowest position of the original seat (when using ST-JJ center hole). Seat offset is 5mm (Recaro moves closer to the door). The forward sliding amount is reduced by 20mm compared to the original.
Notes / Interference information: Please adjust the RMS to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RCS side adapter before installation.
Position: New structure frame. English: Choose from 3 height levels (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.)
Armrest: Can be installed for right hand use on the left seat, and left hand use on the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS For the RMS, please adjust to the optimal position (front/back height, left/right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is any interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set separately. SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold side adapter set (product number 1700000J). SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Driver's seat frame. No side airbag. Compatibility with vehicles equipped with options other than the navigation unit has not been confirmed.
Notes
Images are for illustration purpose only. Actual product may vary.