$262.80 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2081.314.2 |
| Compatible Car | NISSAN CUBE Z12 |
| Product Description | Model year: 2008-11-2020-03 Special notes: Almost the same as the lowest position of the genuine seat (when using ST-JJ center hole). The forward sliding amount is reduced by about 20 mm compared to the genuine seat. Cautions / Interference information: The CS, CSE, CT, and C-clutch use a spacer, so the seating position will be higher by the amount of the spacer. For the RMS, please adjust it to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter before installing. In addition, if there is interference with the interior, it can be alleviated by adjustment. For the RCS, please adjust it to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter before installing. Position: New structure frame. Choose from 3 different heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position. Please test fit before installation.) Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# CS / CR / CG / Conformed CSE CT C-Classic D / DH / DV DS / DS-H / DS-V / ES-V/DSE Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter RCS RCS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter. *Please choose from the following two types.・RCS side adapter Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 You will need to purchase the side adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W Side adapter set (product number 1700000J) must be purchased separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Vehicles without side airbags and 2WD. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
