$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2081.538.2 |
| Compatible Car | NISSAN SUNNY AD VAN WINGROAD Y11 NY11 |
| Product Description | Model year: 1999-05-2008-12 Special notes: The seating position is 10mm higher than the original seat (when using ST-JJ). The seat offset is 10mm toward the door (the Recaro moves closer to the door). The side of the seat cushion interferes with the center console at the front of the slide position. Notes / Interference information: For SR-3, 4, 5, Sport-J, JJ, and JC, the backrest side interferes with the door armrest by 5 to 10mm. For Sport-D and DC, the backrest side interferes with the door armrest by 5 to 10mm, and the switch panel and air lumbar support pump interfere slightly with the door lining, making it difficult to use the switches. For SR-1 and 2, the backrest side interferes with the door armrest by 5 to 10mm, and the shoulder part interferes with the B-pillar by 10 to 15mm. For SP-#, an SP-G offset adapter set (product number 1600094J) is required. For Trend-J, JJ, and JC, the backrest side and door armrest interfere with each other by about 10 to 15 mm. For Trend-D and DC, the backrest side and door armrest interfere with each other by about 10 to 15 mm, and the switch panel and air lumbar support pump slightly interfere with the door lining, making it difficult to use the switch. For Style-D and DC, the switch panel and air lumbar support pump slightly interfere with the door lining, making it difficult to use the switch. For RS/TS-# series, the handle offset can be adjusted in 5 mm increments from 5 mm to a maximum of 15 mm using the RS/TS-G offset adapter set (product number 1700001J). (When installing, please consult your dealer regarding interference with the console side (shift, etc.). For RMS, please adjust to the optimal position (front/back height, left/right offset 0/5/10 mm) using the RMS side adapter sold separately. In addition, if there is interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation. Position: New structure frame. One position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. *Please choose from the following two types.・Side adapter for RCS Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 STYLE-J/JJ/JC AM19 SPORT-J/JJ/JC AM19 TREND-JS AM19 STYLE-JS AM19 SPORT-JS AM19 TREND-D/DC AM19 STYLE-D/DC AM19 SPORT-D/DC/MAGNIFICA CL222HV TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included, 2WD and 4WD vehicles. |
| Notes | Images are for illustration purpose only. Actual product may vary. |
