$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2081.572.2 |
| Compatible Car | NISSAN SKYLINE R32 33 2WD 4WD 4-DOOR NORMAL FRAME |
| Product Description | Model year: 1989-05-1998-04 Special notes: The seating position is 10-20mm higher than the lowest position of the original seat (when using ST-JJ). For vehicles equipped with side airbags, the airbag warning light must be turned off. Notes / Interference information: For LX (including Ergomed), LS, LT, New A-8, and A-8, the seat cushion side and center console interfere by about 10mm in front of the seat slide position. For SR-1 and 2, the shoulder part interferes by about 10mm with the B-pillar, the seat cushion side and center console interfere by about 10mm in front of the seat slide position, and the backrest side and door armrest interfere by about 5-15mm. For SR-3, 4, 5, and New Ortho, the seat cushion side and center console interfere by about 10mm in front of the seat slide position, and the backrest side and door armrest interfere by about 5-15mm. For SP-# and Racer, the SP-G offset adapter set (product number 1600094J) is required. Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installation. If there is any interference with the interior, it can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installation. Position: New structure frame. One-position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter Rally Special / First generation SR / SR-2 early model Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set AM19 STYLE-JS AM19 SPORT-JS TS-G / RS-G / TS-W / RS-W You will need to purchase the side adapter set (product number 1700000J) separately. SP-X SR-6 /SR-11/SR-7 SR-S SR-C/ SR-7F Sportster CrossSportster |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. 2WD, 4WD, 4-door. (Installation conditions vary depending on whether the vehicle is 2-door or 4-door, so please check the number of doors.) |
| Notes | Images are for illustration purpose only. Actual product may vary. |
