RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR NISSAN STAGEA C34 2081.575.2

$268.06 SGD

| /

Brand
RECARO
Series Name
BASE FRAME SEAT RAIL RIGHT SEAT
Product Number
2081.575.2
Compatible Car
NISSAN STAGEA C34
Product Description
Model year: 1997-08-2001-09
Special notes: For vehicles with side airbags, the airbag warning light must be turned off. The seating position is approximately 10mm lower than the original seat (when using ST-JJ). Seat offset is 10mm toward the door (the Recaro seats move closer to the door). For 4WD vehicles, the seat and center console interfere with each other, making it difficult to slide forward.
Notes / Interference information: For SR-1 and 2, the shoulder part interferes with the B-pillar by approximately 10 to 15mm. For SP-# and Racer, the SP-G offset adapter set (product number 1600094J) is required. For RS/TS-# series, the RS/TS-G offset adapter set (product number 1700001J) allows the steering offset to be adjusted in 5mm increments from 5mm to a maximum of 15mm. (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, this can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. One-position type.
Armrest: Not mountable
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS RMS should be adjusted to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be alleviated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). PRO RACER (RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set (product number 1600094J). AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of separately sold side adapter set or RS/TS-G offset adapter set. [Seating position priority] Side adapter set (product number 1700000J) [Offset priority] RS/TS-G offset adapter set (product number 1700001J) The handlebar offset can be adjusted to 5/10/15mm left and right. (The seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster
Remarks
(Note) This product cannot be installed on any seats other than those listed in the matching information below. Side airbag canceller included
Notes
Images are for illustration purpose only. Actual product may vary.