$268.06 SGD
| /
| Brand | RECARO |
| Series Name | BASE FRAME SEAT RAIL RIGHT SEAT |
| Product Number | 2081.576.2 |
| Compatible Car | NISSAN SKYLINE R32 33 34 4WD SPORTS FRAME DRIVER'S SEAT |
| Product Description | Model year: 1989-05-2002-01 Special notes: The seating position is 5mm lower than the OEM seat (when using ST-JJ). The forward and backward sliding distance is reduced by 40mm compared to the OEM. The side of the seat cushion interferes with the center console at the front of the sliding position. The slide rail is offset to the rear seat feet (approximately 150mm) to lower the seating position, so it may interfere with the roll cage or damage the floor carpet. Notes / Interference information: For SR-1 and 2, the shoulder part interferes with the B-pillar by 5 to 10mm. When installing SP-# or Racer on R32 and 33, the SP-G offset adapter set (product number 1600094J) is required. For RMS, adjust to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter before installation. The lowest height adjustment hole of the side adapter cannot be used because it interferes with the floor. Also, if there is any interference with the interior, it can be alleviated by adjustment. Adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installing. Position: New structure frame. One-position type. Armrest: Not mountable Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base) Classic LX Pepita / Classic LX Spektrum LX-F (IS-05 base) LS / LS-# / LT-# Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter Rally Special / First generation SR / Early SR-2 Late model A-8 Early model A-8 SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set SR-S SR-C/ SR-7F |
| Remarks | (Note) This product cannot be installed on any seats other than those listed in the matching information below. Sports frame. Frame for driver's seat only. Side airbag canceller included. R32, 33, 34. However, R34 2WD vehicles are excluded. *However, if you are installing RMS on R32, R33 2-door vehicles or R34 2-door 4WD, please use the RMS dedicated base frame. Part number 2081.012.2 |
| Notes | Images are for illustration purpose only. Actual product may vary. |
