RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR NISSAN SKYLINE V35 2WD 4WD 4-DOOR DRIVER'S SEAT 2081.835.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2081.835.2

NISSAN SKYLINE V35 2WD 4WD 4-DOOR DRIVER'S SEAT

Model year: 2001-06-2006-10
Special notes: The seating position is 20mm lower than the factory seat (when using ST-JJ). The seat offset is 10mm toward the door (the Recaro seat moves closer to the door). The forward slide amount is 35mm less than the factory seat. The active seat cushion function must be cancelled (this function will not work if you replace the seat with Recaro).
Notes / Interference information: The shoulder part of the SR-1 and 2 interferes with the B-pillar by 5 to 10mm. The SP-# and Racer require the SP-G offset adapter set (part number 1600094J). For the RS/TS-# series, the RS/TS-G offset adapter set (part number 1700001J) allows the steering offset to be adjusted in 5mm increments from 5mm to a maximum of 15mm. (When installing, please consult your dealer regarding interference with the console side (shift, etc.).) Please adjust the RMS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before installing. Also, if there is interference with the interior, this can be alleviated by adjustment. Please adjust the RCS to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before installing.
Position: New structure frame. One-position type.
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
C-Classic
Pro Racer RMS RMS is to be installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) with the separately sold RMS side adapter . Also, if there is interference with the interior, it can be mitigated by adjusting. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (product number 1600110J). PRO RACER (RACER) SP-G/A SP-#, Racer require the separately sold SP-G offset adapter set (product number 1600094J). AM19 TREND-J/JJ/JC
AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W For RS/TS-# series, please choose from two types of side adapter set or offset adapter set for RS/TS-G (sold separately). [Seating position priority] Side adapter set [Offset priority] Offset adapter set for RS/TS-G The handle offset can be adjusted to 5/10/15mm left and right. (The seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. 2WD, 4WD, no side airbags, 4-door

Images are for illustration purpose only. Actual product may vary.