RECARO BASE FRAME SEAT RAIL LEFT SEAT FOR NISSAN NOTE E11 2081.846.1

RECARO

BASE FRAME SEAT RAIL LEFT SEAT

2081.846.1

NISSAN NOTE E11

Model year: 2005-01-2012-08
Special notes: The seating position is almost the same as the OEM seat (when using ST-JJ center hole). Seat offset is about 30mm toward the door (Recaro is closer to the door). Not confirmed for vehicles with optional center console. Slide amount is reduced by about 20mm compared to OEM.
Notes / Interference information: LX (including Ergomed series), LS, LT: Backrest side and door armrest interfere by about 5-10mm. New Ortho (sold until October 2010) is installed with backrest width adjustment at its narrowest. SP-# requires SP-G offset adapter set (product number 1600094J). Style-J, JJ, JC, D, DC: Backrest width adjustment is installed at its narrowest, backrest side and door armrest interfere by about 5-10mm. For RS/TS-# series, the offset of the handlebars can be adjusted in 5mm increments from 5mm to a maximum of 15mm by using the offset adapter set for RS/TS-G (product number 1700001J). (When installing, please consult with your dealer regarding interference with the console side (shift, etc.).) For RMS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RMS side adapter before mounting. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10mm) using the separately sold RCS side adapter before mounting.
Position: New structure frame. English: Choose from 3 heights (For some car models, the legs of the slide rail may need to be cut depending on the installation position, so please test fit before installation.)
Armrest: Can be installed for the right hand of the left seat, or the left hand of the right seat
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / Ergomed C / Ergomed D / Ergomed E / Ergomed LD / Ergomed MV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
Pro Racer RMS For the RMS, please adjust to the optimal position (front/back height, left/right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be mitigated by adjustment. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set . AM19 STYLE-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 STYLE-D/DC
TS-G / RS-G / TS-W / RS-W For RS/TS-#, please choose from two types: Side Adapter Set or Offset Adapter Set for RS/TS-G (sold separately). [Seating position priority] Side Adapter Set [Offset priority] Offset Adapter Set for RS/TS-G The handlebar offset can be adjusted to 5/10/15mm left and right. (Seating position is raised by +5mm.) SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. 2WD vehicles. No side airbags.

Images are for illustration purpose only. Actual product may vary.