RECARO BASE FRAME SEAT RAIL RIGHT SEAT FOR NISSAN SKYLINE CKV36 2-DOOR COUPE DRIVER'S SEAT 2081.855.2

RECARO

BASE FRAME SEAT RAIL RIGHT SEAT

2081.855.2

NISSAN SKYLINE CKV36 2-DOOR COUPE DRIVER'S SEAT

Model year: 2007-10-2014-04
Special notes: The side airbag built into the factory seat will no longer function. Airbag warning light must be turned off. The lowest position of the factory seat is almost the same as the seating position (when using ST-JJ). Seat offset door side approx. 5mm (Recaro moves closer to the door). The forward slide amount is reduced by approx. 20mm compared to the factory.
Notes / Interference information: SR-1, 2: Shoulder part interferes with B-pillar approx. 10-15mm, backrest side interferes with door armrest approx. 5-10mm. SR-3, 4, 5: Backrest side interferes with door armrest approx. 5-10mm. SP-# requires SP-G offset adapter set . Style-J, JJ, JC, D, DC, New Orthoped: Backrest side interferes with door armrest approx. 5-10mm. For Spot-J, JJ, JC, D, and DC, the backrest side and door armrest interfere with each other by about 10 to 15 mm. For CS and CSE, the backrest side and door armrest interfere with each other by about 5 to 10 mm, and the seating position will be higher due to the use of a spacer. For RMS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RMS side adapter before installation. Also, if there is interference with the interior, it can be alleviated by adjustment. For RCS, please adjust to the optimal position (front-to-back height, left-to-right offset 0/5/10 mm) using the separately sold RCS side adapter before installation. Position: New structure frame. One-position type.
Armrest: Not compatible
Compatible seats: LX / LX-# / LX-VS / LX-VF / LX-VL / Ergomed / ErgomedC / ErgomedD / ErgomedE / ErgomedLD / ErgomedMV (IS-84 base)
Classic LX Pepita / Classic LX Spektrum
LX-F (IS-05 base)
LS / LS-# / LT-#
CS / CR / CG / Conformed
CSE
Pro Racer RMS RMS should be installed after adjusting to the optimal position (front-rear height, left-right offset 0/5/10mm) using the separately sold RMS side adapter . Also, if there is interference with the interior, it can be mitigated by adjusting it. New Orthoped (with Recaro vent)
RCS Please adjust the RCS to the optimal position (front/rear height, left/right offset 0/5/10mm) using the separately sold RCS side adapter before installation. *Please choose from the following two types. ・RCS side adapter ・RCS stainless steel side adapter set SR-2 late model / SR-3 / SR-4 / SR-5 / SR-VF / SR-IMPACT / SR-IMPACT Pro
Rally Special / First generation SR / SR-2 early model
Late model A-8
Early model A-8
SP-A / SP-G / SP-G2 / SP-G3 / SP-GT / SP-GT2 SP-# and Racer require the separately sold SP-G offset adapter set . SP-AN / SP-GN / SP-GN 2 SP-AN / SP-GN / SP-GN 2 require the separately sold SP-GN side adapter set (part number 1600110J). PRO RACER (RACER) SP-G/A SP-# and Racer require the separately sold SP-G offset adapter set (part number 1600094J). AM19 STYLE-J/JJ/JC
AM19 SPORT-J/JJ/JC
AM19 TREND-JS
AM19 STYLE-JS
AM19 SPORT-JS
AM19 TREND-D/DC
AM19 STYLE-D/DC
AM19 SPORT-D/DC/MAGNIFICA CL222HV
TS-G / RS-G / TS-W / RS-W You will need to purchase the separately sold side adapter set (part number 1700000J). SP-X
SR-6 /SR-11/SR-7
SR-S
SR-C/ SR-7F
Sportster
CrossSportster

(Note) This product cannot be installed on any seats other than those listed in the matching information below. 2-door (coupe) driver's seat frame. Side airbag canceller included. For cars with personal driving position memory system, the unit inside the seat must be relocated.

Images are for illustration purpose only. Actual product may vary.